November 18, 2018

“Rings” and Tensor Fields

Tensor Ring Technology, developed by Slim Spurling in the 1980s and 1990s, is supported by exciting research currently receiving considerable attention. “Rings” are closed loop coils. When they are made to certain specifications, they amplify subtle energy by several hundred times (according to Hans Becker who did some of the initial work with Spurling). Originally called Light-Life™ Rings, they are now also known as Tensor Rings. These simple devices can have a powerful effect on water and on living biology.

Tensor Rings create a toroidal vortex—a region of rotating movement where the flow takes on a toroid (doughnut) shape.  Examples of this phenomenon are smoke rings and bubble rings. A very interesting YouTube video shows toroidal vortices produced by dolphins, whales, volcanoes, etc.

Tensor Rings also form what is called a tensor field across the opening of the Ring. The concept of the tensor field was described by the physicist, John A. Wheeler who outlined mathematical equations to explain their existence. According to Wheeler, if you could see a tensor field, it would resemble the thin film that forms when a loop is dipped in a soapy liquid. The energy of a tensor field is not yet fully understood. It is considered by some to be a distortion in time/space/gravity.

Those who perceive subtle energy describe a beam of light within a Tensor Ring that extends in both directions. The energetic column appears to organize the space within. As water passes through a Tensor Ring, its molecular structure becomes more organized; the longer it sits inside the column, the more refined the structure becomes. Tensor Rings can be used around a container of water, around faucets, showerheads—even the incoming water line. As the structure of the water becomes more organized, chlorine is released, pH becomes more balanced, and the taste of the water generally improves. Other improvements that are more difficult to quantify, augment water’s energy. Because of the column of energy that is created by a Tensor Ring, it is one of the most useful devices for protecting water from the effects of electromagnetic fields (EMFs) and other outside influences. It is often used to preserve the “information” that is imprinted to water. Tensor Rings  can also be used to amplify the energy during the imprinting process as outlined in the book, Dancing with Water and illustrated in the diagram to the right.

One of the ways Tensor Rings augment water’s energy is through the influence of paramagnetism. According to Phillip Callahan, an expert on paramagnetism, Tensor Rings exhibit a paramagnetic value many times greater than anything ever tested. This means that Tensor Rings cause some of the elements in water to spin to their high-spin state referred to as ormus. This has an impact on water’s molecular structure and on the energetic components of the water. Evidence for the presence of ormus can be seen in this experiment: Place two equal volumes of water in identical containers on a balance scale so that they are equally balanced. Place a Tensor Ring directly over one container. After 48 hours, the container with the Ring above it becomes measurably lighter (the difference in weight is dependent on the type and amount of minerals or salts in the water that can enter a high-spin state). Read Chapter 3 in the second edition of Dancing with Water to understand how the high-spin state (ormus) can reduce an element’s weight.

Besides their effect on water, Tensor Rings have been used to augment plant growth and vitality. They have been used to reduce pain and inflammation, and to hasten healing. No health claims are being made, however, if Rings “organize the space” (create coherence) within their energetic column, this would explain their ability to reduce inflammation and their ability to improve the healing response.

Tensor Rings are most often used as a single unit (placed around a pitcher of water, over a faucet, or around a water line), but they can be used in groupings with interesting effects. When placed in series (shown right) their energetic columns merge to create a stronger, expanded field. This setup is ideal for an incoming water line.

When certain sizes (based on specific lengths) are used in sets of three, harmonic resonance is created—much like a musical chord where the chord completes the expression of each individual note. The authors of Dancing with Water have identified a set of three Rings they refer to as the Harmonic Creation Field Trio. When used together, they create a vibratory chord resonating with the universal creative field of energy. The “base frequency” in the Harmonic Creation Field chord is the Earth Resonance frequency, provided by the inner Ring. It grounds water, strengthening and refining its connection to the core energy of the Earth. This Ring, referred to as the Earth Resonance Ring, creates the foundation on which the chord is built. The next larger Ring in the trio is called the Golden Fire Ring; it restore water’s original life-supporting blueprint. The outer Ring of the Trio is referred to as the Regeneration Ring. This Ring is aligned with the bio-regenerative frequencies of the Earth’s creative center. It strengthens water’s ability to support natural and ongoing regeneration. In the experience of the authors of Dancing with Water,  consumption of water made using this set of three Rings gradually clears chaotic vibrations and attracts life force from the Earth’s bio-regenerative field.

You can make your own Tensor Ring by following the directions below:

How to make a Tensor Ring
Tensor Rings are made of copper wire (10 or 12-gauge works well to treat water). They can also be made of silver or plated with silver or gold for a broader spectrum effect. The length and configuration of the wire are both important to their design and function.

The Cubit
The original cubit length identified by Slim Spurling was 20.6 inches cubit length—the basic unit of measure used in building the Egyptian pyramids. This original cubit length (also called the Sacred Cubit length) is based on the circumference of the Earth at the latitude where the Pyramids are built. Spurling and Hans Becker eventually identified another cubit length, 23.49 inches. They referred to this as the Lost Cubit because it appeared that it may have been intentionally left out of many ancient, written records.  For a detailed description of the differences between the two cubit lengths and their use with Tensor Ring technology, you may want to read the book, Slim Spurling’s Universe. Since then, other cubit lengths have been identified.

In 2015, the authors of Dancing with Water identified a measurement of 19.65 inches with a resonance they refer to as the “Earth Core” resonance. Tensor Rings made using this measurement are tuned to the Earth’s central core and to the Earth’s natural energy field.  They strengthen water’s connection to the core energy of the Earth. This cubit length is extremely grounding and protective for water. Thus, the length of the wire in the basic Tensor Rings sold and used by Dancing with Water is 19.65 inches—or a multiple, half multiple or harmonic of that length.

Polarity
Slim discovered that the ends of a length of wire have polarity (a positive and a negative side). If wire is looped back on itself and joined together, one side of the loop has a positive polarity while the other side of the loop has a negative polarity. To overcome this, Slim used a length of wire twice the cubit length and folded it in half. He also twisted the wire.

Twisted wire
In electronics, an amplifying system is subject to electromagnetic interference (noise). In order to cancel the noise, the two input wires are twisted. This is known as Common Mode Rejection. Twisting the wire when making a Tensor Ring negates interference; it cancels the magnetic field and creates the unique tensor field described earlier that can be seen by some individuals resembling a soapy film.

NOTE: It is not surprising that Navajo hogans (round dwellings made of logs) were meticulously constructed so that the positive and negative ends of each log were carefully matched to create one continuous closed loop of a specific length. This creates a tensor field that augments the living environment.

Closing the loop
The twisted wire is formed into a loop so that each original piece of wire is connected back to itself in a continuous loop. The two ends of each wire are welded together.

Purchase Tensor Rings